The Good. Solid construction and firm jiggle-free lock-up with stock extended. The extended forearm mounts solidly and should prove worthy of a laser.
The Bad. It's heavy. This is a good thing when shooting offhand but a bad thing if you are backpacking.
The Ugly. Magazine release is problematic. 10 round magazines have to be pushed out from the top with the bolt held back. I have seen this with other aftermarket plastic stocks. Ruger's factory synthetic stock has a special bevel at the back of the magazine well to correct this problem. This too can be overcome with the judicious use of a Dremel tool.

Great american made product

I opted to order one the offered blem folding stock together with the forearm for my Ruger 1022 takedown. This is in anticipation to the rough and hard use of that rifle ahead. My thinking was a bit of minor cosmetic flaw would be acceptable since it will collect dings and scratches later on. Was a bit lucky and happy when I received the stock. You won't notice at all that it's a blem unless you look real hard. Just a bit of mottling like surface above the pistol grip. The forearm needs some fitting with the barrel but that was the way I like it. I was able to fit my barrel more precise than the stock Ruger forearm. The construction is also very robust! All in all I am very happy and will be taking it to the range once I receive my optics. By the way delivery was relatively fast also.

Great vitality and firm but easy manipulating of the folding feature. Good mount options. Better than expected!

AGP ARMS 10/22 FOLDING STOCK KIT GEN2 BLEM

Preface: Please read knowing that I have very specific idea of a 100% perfect setup/stock in mind. My review focuses on pros of cons of this AGP and how close it comes to matching my fictional perfect stock. I cannot fault the product as-designed and the rating reflect overall fit and function as it stands. Below are some of my exploratory opinions of how it would better suit my ideal stock the 'AGP Gen III' and I few things I would change about the stock and also a small thing or two about it's current pricing

So my perfect stock would be for K.I.S.S. backpacking with standard (non-takedown) 10/22. It would be the absolute lightest possible folding stock that also allows use alignment of the factory lower profile iron sights. It would have an integrated stub or short forend that would not borrow existing parts from the Takedown handguard AGP already makes, bypassing the heavy billet T-Block. I have no need or desire for more increased weight or complications that *any* other optics bring. Clamp on style or aftermarket aperture sights (with rear on receiver, front on front barrel post even) are no-go for me and can get budged and when the sights are not attached to a single plane (both on barrel) there is more variables introduced with inadvertent rough handling. YMMV. Now, while this AGP stock *does* meets 80% my needs it is still not what I would need in a perfect stock.

The Good:
Stock is lightweight, rock solid locking mechanism and swinging motion. Blemish non-existent. Baffling how lightweight it is for it size and sturdiness. Easily the best folding stock for Ruger 10/22. Would feel equally at home on much more expensive guns.

While this website shows pictures of this stock wearing a factory barrel, be advised that factory profile iron sights are WAY too low for this stock. Yes of course description mentions this, but sometimes things can tweaked just enough to work out. Nope. My eye needs to drop approx 1.25" to align with the factory sights. I carefully compared this stock's comb to the bore line using lines and photos of my old stock. While both stock's comb height appear similar in photos in person this stock provides a MUCH higher comb height/cheek position than my old stock. Certainly both Tech Sights and NDS sights would be closer to a comfortable sight height, and maybe somebody can comment who is using this setup. Basically if you want this stock just be willing to adjust your sights/optics to accommodate this stock, not the other way around. Again nothing I didn't know about this stock and certainly my own ignorance and have no qualms against the stock in that regard. Lastly it could indeed fold left like others have said but didn't bother me too much. Who uses this with the stock folded? and to the right it doesnt hinder usage. Think of the folded stock like a roll bar for your charging handle from getting dinged or snagged in transportation

The Bad:
I really wished this stock had removable cheek piece to make it higher/slightly heavier only if you *wanted* to use a scope or higher profile iron sights. That would make it perfect for my needs. Heck even make it folding, adjustable comb/LOP and charge $250 for it. Short of filing the upper half of the stock tube, you are out of luck to get a lower comb height with this stock. To use *any* sighting system (besides factory sights) with this stock requires that you add weight in rails/scopes/red dot/ghost ring style sights etc. For my needs that is trading in K.I.S.S. for unnecessary/unreliable/battery dependent electronic optical 'gimmicks' or perhaps you find and optic it's dead-nuts reliable, non electronic, but then the rifle becomes less compact, gains prohibitive weight, and perhaps even exceeds the optical limitations or price point of the host 22LR itself. Sigh. And 11.75" LOP as starting point really? Lol. The 1" buttpad should not be an add on and if it is it should certainly not be north of $10. IMHO make it solid molded to 12.5" LOP and do .5" incremental add-ons from there. That's a better starting point for legitimate use with winter clothing not to mention tactical vest wearing breeds. Larger customers need not apply here with a max LOP of only 12.75". The super thin butt of the stock promises very little to DIY'er who could otherwise rig up some custom spacing system on their own

The Ugly:
I like the look of AGP products and on paper or priced separately they are very eye-catching. When you sit down ad add up what you need to have a 'full' stock on your 'standard' rifle it can get a little crazy; folding stock+handguard+T Block adapter+1" recoil pad+two picatinny rails. Not to even mention QD sockets. You quickly approach or even exceed retail price of an entire new 10/22. If it wasn't for the 10/22 takedown's accessorization, err I mean 'existence', would AGP even be produce offer a 'full' stock for the 'standard' rifle? Even at $120 it would be worthwhile IMO; purpose-built, probably a half pound lighter, and not just some bolt-on adaption derived from the takedown to simultaneously please both breeds of 10/22. I would argue a folding stock on even a full size 10/22 nearly negates this entire gimmicky takedown concept entirely.

Currently you will need between 3-6 individual 'parts' from AGP to have a full stock the way you want it if you have a 'standard' rifle. It's what we have so if we want it we will pay. Hopefully AGP can see that there's a market for several variations on their stock. Thank you and I hope you will find any criticism herein has been constructive and above all, keep up the good work!

Overall rating 3.75/5

The stock is very high quality. The whole thing feels very rigid with ZERO play in the folding mechanism. Very good latch. However, there are a few flaws that need addressed. First, the rail mounts on the foregrip are not pre-tapped. Even with the self tapping screws, it is a pain to attach the rails. I had to run the screws in, then take them out, then put them back in thru the rail itself. It is very tight and easy to strip the screws. Also, the pistol grip is a bit thin for my taste, but I have larger hands. One big design flaw IMO is how the stock folds to the right side. When the stock is folded, I have a hard time moving my finger between rest and the trigger, as the stock is pressing it against the gun. Should fold left. Besides these minor blemishes, it is a great stock and really feels ergonomic. FYI, get the 1 inch butt pad. Not very comfy without it.

As others have said "what blemish". I didn't look really hard for a blemish, but couldn't find anything wrong with the cosmetics. I would have given this item a 5 star rating if it weren't for the fact that the holes on the butt end to attach the 1" butt pad to weren't drilled deep enough. The screws which came with the butt pad wouldn't tighten the pad. Luckily I had 2 of the same size screws, but shorter which did the job. Looks and works great on my 10/22.

this is a no brainer,solid,perfect fit!...i recommend the butt pad 1",and the forearm for the barrel because,well they just look good together to me..also "blem"??? i can't compare to the alternative, but i say save the money,and buy a couple more 25 round magazines!!

The stock is great, not a blems to be found.
looks like a good discount.

Screwed right on with no issues. Best deal I've found. I'd advise getting the forestock with QD fitting and a butt pad if you have long arms.

Been eyeing this what seems like forever and finally pulled the trigger. As expected, great quality and solid lockup. I would need to compare against a non-blem model to see what isn't up to standard, but as it is I see no issues.

One thing to note, I'm not able to get a sight picture with the barrel mounted open sights, the stock comb is too high. It's absolutely perfect for optics though.

Got the fde blemish kit for a take down model. Fit was perfectly snug. I had to trim a little around the locking wheel so it would spin. Cam out lookibg amazing. I am extremely please with the value for my hard earned money. Solid stock, folder mehanism is solid and locks up tight. If you're on a budget I highly suggest the blemish kits. Don't spend more or waste time shopping. If you like the look of this stock and it fits the bill, BUY IT NOW. You will have zero regrets.

The stock is great quality, it looks great, there is no noticeable reason for it being labeled as a blem, it is super easy to install and it arrived at my door 3 days after I placed my order. Will reccomend it to any 10/22 takedown owners who wants to turn their 10/22 into a bad ass looking machine !!!
I gave 4 stars instead of 5 because the pistol grip could possibly be slightly bigger and $12 extra for the butt pad is a bit much and I think the butt pad is a must have add on.

I love the stock, it fit perfectly and required no alterations. I'd definitely recommend it, and the foregrip. The customer service was unreal, great people.

I placed my order and 3 days later I had my takedown stock kit in hand.

First impressions...

The stock and fore end seem to be of good quality. It's relatively lightweight. In a couple minutes I had my Ruger Charger takedown installed into the new stock kit. (Done per the law)

My criticisms...

I wish the stock folded to the left side vs the right side. It doesn't comfortably allow me to fire with the stock collapsed. I have to swing the stock out just an inch of so to give the necessary clearance to access the trigger.

If the stock was folded to the left side of the the firearm, it wouldn't interfere with the typical right-handed person's ability to comfortably hold the grip and access the trigger.

Also, the stock does not lock in the closed position (not a deal killer, but it would be nice to have that as well).

My final, and biggest gripe is that the rear of my receiver has noticeable side-to-side movement in the stock kit. It doesn't take much more than holding the stock in one hand and pushing on the receiver to the left of right with my thumb and I can get it to shift up to an 1/8th inch eitherway in the stock.

While disappointing, it doesn't mean that this stock isn't worthwhile or that it should be avoided. It was designed as a compact option to make an aleady compact firearm (takedown 10/22's & Chargers) even more compact, and it excels at that. I believe for the money, it is a good stock.

I will be bedding the receiver into the stock kit for a finished fit. I also added a ITS grip (inner-tube special) around the pistol grip for both added grip and to increase the grip girth for more comfort.

Lastly, I also ordered the 1" buttpad and I am glad that I did. Any shorter and it really wouldn't be very practical or comfortable for an average sized man to shoulder and fire.

got this at 60!. better than most stocks out there. has compartments in stock for storage. really sturdy lockup. will be really good for survival folder.

Recieved your product quicker than expected. As described. Couldn't find the blem, which is good. Did a little drimmel work to get it to fit better. Otherwise no hassel, no bother.

I received the order very quickly. The item was in excellent condition. I am very pleased with the order and highly recommend the company

I bought this stock based on the reviews I read. I was not disappointed. If this was a blem, I can't imagine what a non blem stock looks like. The fit was perfect

So light and snug fit

!! Looks great grip is so much more comfortable than expected. Can shoot one hnded with stock folded without a problem thanks agp!

I really like this stock! I'm confused why Ruger doesn't offer a pistol grip version of their 10/22. I did have to do a little shaving at the front of the stock to allow the adjustment knob to move where the barrel fits. I'm fine with that, especially since this is a blemished item. I also had to round off the latch just a bit so that the stock would lock open without me having to push the button every time.

My biggest complaint isn't with the stock. It's with Ruger's trigger. Adding a pistol grip changes how you pull the trigger and now it doesn't feel right. I feel like I have to pull up on the trigger instead of straight back. If anyone knows of a trigger mod to fix this please let me know.

But this stock really does look great. It fits great. And the price is fantastic. Like everyone else, I have no idea why mine is a blemished item.

If there is a blemish I can't see it anywhere. Fit on perfect and looks great!

Everything bolted on easily and fit perfectly.

My 10/22 Folding Stock is awesome. Everything matches up and bolted up perfectly. I cant find anything that would indicate where the blemish is.

Like most of the reviews , I don't see any true defects on this stock. The folding stock locks up tight unlike a lot of folders out there. Great stock for my SBR build.

Made this 10/22 set for my camper. Used a 50th anniversary edition stainless for base gun, added Volquarsten trigger and extended magazine release, AGP stock finished it off nicely. Mine is a blemished stock and fore end, but can't find the problem.

I purchased a Ruger AGP stock for the Ruger 10 22 I absolutely love this stock it feels just right in your hands I Couldn't be happier with my purchase of this stock extremely satisfied highly recommend to anybody looking for the best

This stock is a perfect fit. It being a blem model I of course took the first 15 minutes trying to find one and finally found a small molding flaw near the barrel. I am very pleased with the size as this is a rifle i am storing in my "go" pack in my car. Next purchase will be the barrel and hand guard. Thank you for a great product that does what it says it will do!

I purchased the "Blem" option because I am abusive to rifle stocks anyway and I figured what would it matter if it came with noticeable blems / scrapes already or if I made them myself. I'm still trying to figure out what the blemish is. Maybe it is the extra burr on the cutout of the stock, i don't know and like I said, don't care, this thing is sweet! Fits like a glove. Had to tap it in with a rubber mallet and that was it. LOVE the check weld it gives with irons & even better with the Fastfire. Feels solid, slim & lightweight. Hold the tolerances are surprisingly tight. Great product, thanks!

Installed in a minute. Sturdy with an extra storage tube built in. Could use a cap for the grip to make that a storage compartment also. Customer service was fast. Had a question about the swivels and they even sent the link to Amazon to buy them.

It said BLEM when I ordered this item.

If it's blemished in anyway, I could not find that blemish.

I did order the sand color, they called and said they did not have sand at this time (you notice I said called, not emailed) and ask if black would be OK. I said black would be fine. I rec'd. the stock 3 or 4 days later. Their on the East coast and I'm on the West coast.

My receiver fit like a snug glove, holes lined up, what else can I say.

The part is great, the customer service is great, every things great!!!

Wish other companies provided as good of products and service.

Thanks AGP.

Roy S.

Very nice product

Well made; fits well; fast shipping & responsive
Service. Very pleased-- bought second set.

I haven't field tested the stock yet, but it's an obvious improvement right out of the box. A compact firearm is now much more compact. The stock is strong and light.The hinge is much more tight than most folders that I've owned, but that's a positive note in my opinion, as it's naturally going to be the weakest part of the design, so more robustness in that area is welcome.

On a side note, either I couldn't find the blemishes on mine, or AGP has some very high standards of quality.

Two points to consider (I wouldn't call them detractions): The pull is very short. I have a raised, see-through rail installed, and it's a tad uncomfortable to get my head angled just right with the short pull. Compactness and mobility are my top priorities with this gun, though, so I'm happy to make that trade from the original rig. Second, the cavity in fore-end of the stock is a little narrow for the barrel attachment assembly, and I couldn't get that part of the rifle in by hand. I had to pull it down by tightening the screw on the bottom of the stock. I was a little nervous with this because I was afraid of cracking the polymer, but all went well.

Overall, I'm very pleased and surprised that the most viable commercial option on the market is also well made.

This stock is exactly what I was looking for. The grip is a bit small but definitely functional. Stock locks up solid. The only work I had to do was file the front inlet slightly to keep it from binding on the barrel tension nut. For a blemish product I would say they must have some high standards. Oh, and buy the buttpad. You will need it.

I bought my first AGP stock in April 2013. I purchased another Takedown 10/22 and didn't waste any time looking elsewhere when this stock is the best available. Save your money, buy the "Blem" it looks perfect with minor changes( finger groove hand grip) that are a nice improvement. Fit and finish has been maintained, it's great to see a product that displays this level of consistency. I am surprised that Ruger hasn't contacted AGP to make this stock a factory option on their Takedown Model. As I said the last time If the need arises again for this type stock...." I'll be back"

Great product, lightweight but strong, I can't see where or how it's blemished, great price, would be 5 stars but should have a slight extension in length to cover the v-block screws to prevent dirt & elements.

This is a very lightweight, well constructed and well designed ruger 10/22 stock. I had the ATI folding stock for over a year, and while it was ok I found it to be heavier than what I wanted. I have researched this stock for quite some time, but couldn't pull the trigger due to the lack of a handguard. If you are like me and don't want to spend the extra $$$ on AGP's take down kit there are options for you. I found a UTG barrel mount with 5 picatenny slots and also purchased a five position foldable fore grip. Those two items coupled with with the Ruger 10/22 and this AGP stock work perfectly for me as a pack rifle. It is very lightweight and I now have three storage compartments on my rifle. Also for a blem there are no noticeable marks or blemishes of any kind. The one thing that did surprise me though was the stock when folded does not clip onto the side of the rifle. Not a big deal as it is stiff when folded, but probably worth mentioning. Thanks AGP!

I paid full price. Has small circles (depressions) molded in, on one side.

Man, I missed this one. I ordered one at full price. Could have saved $30.00. Well, mine came in today in a very small box, just as people say. Receiver fit fine, like it's where it came from, but I did not like the shape near the front of the stock where it meets with the hand guard under the barrel at the bottom, so I took out the file and went away at it, then sandpaper. Shape is much better now.

It did not come with the brass threaded insert which captures the hex bolt at the front of the stock, the one you take out to remove the receiver, so I punched the old one out of the factory stock. It was like it was molded in. If you do that, use a proper punch, and you will also have to drill a bit out on the new stock. Use proper bits and go slow. I had a brad point bit that I used to make a flat bottom hole and tapped in in with a hammer. Looks like it belongs there now, and I won't loose the screw when I loosen it.

Overall, I like it and do recommend. Pistol grip feels right and is easier on the wrist. Better hold, more natural. You can pull it into your shoulder. Recommend the rubber butt for comfort which will add 1", which I believe the stock needs. I will also try adding another inch of either wood or fiberglass product, like fiberglass resin jelly or something similar.

Hit the order button and three days later at noon this thing was on my doorstep in the smallest box ever lol. I tried my best but could find no signs of a factory blemish, they either mistakenly sent me a regular one or their quality control is on another level. In short this stock is awesome, my 1022 dropped right in and the folding stock mechanism was flawless. Thanks guys!

If this is a blem then it must be some microscopic blem because the looks, fit and function are top notch. Well worth every penny spent.

I just put this stock on my 10/22 and it couldn't have been easier. It took about 3.5 min from start to finish, and that includes taking it off the original stock.

The quality and engineering is beyond what I expected for $70. The release mechanism is very sturdy and built for a life time of use and abuse.

As far as the blemish goes, I have yet to find it and I went over the stock pretty thoroughly. It looks darn near perfect to me. That certainly speaks to the quality control standards at AGP. I would recommend to anyone considering this stock to get a blemished one and save the money. The blemish isn't noticeable to me.

My one complaint is more of a wish. There is nothing wrong or lacking from the stock itself. What the gun now needs is a hand guard. The long barrel of the non take down model makes it look a little goofy. A hand guard like the ones for the take down model would balance it out and really make it looked finished. Right now you kind of have to hold it by the banana clip, or if using a 10 round clip your hand can go around the stock there. Again it would be, and from what I hear will be really nice when AGP comes out with a hand guard for all of us without the take down models.

Worked perfect

nice can hardly see blems-has to be the pin marks from the mold but hardly noticable-locks up tight-would give 5 stars except length of pull is very short 1 inch maybe as much as 2-order the 1 inch recoil pad and should be perfect-dont know why it was made so short could have been an inch longer and would have been only as long as the front of the stock when folded and not as long with scope

this product its just the rite size .

Did a lot of homework before making this purchase. Took a chance and ordered the "blemished" stock. What blemish! Looks fine, works perfectly. Fit and finish is excellent and really make a 10 22 light weight and flexible. Recommending it to all my friends!

I couldn't find a blemish aside from a pin hole in the end of the stock tube where buttpad extensions can be screwed on. Overall a neat little stock for a tacticool, survival rifle.

Blemished? Not quite.... The finish on this was perfect. The only "blemish" I could find was with the fitment. The receiver and pistol grip don't sit flush together and there is a slight gap between the two. Will this inhibit function? No. It's just a small gap between the two about 1/4" (Maybe smaller). Worth saving ~$30 to me.

Quality product with everything going together smoothly just as it should. Only thing I would make better is the latch to bring the stock back all the way open has to be depressed to lock it in place.

It works great with my 1022 pocket SBR and outback suppressor. I did add the rubber recoil pad. Great Deal!!!!!!!

I couldn't find any blemishes!

I'm with the others on here...I'm not seeing any blem(s) on the stock I received. This stock locks up tight...there's no play at all in it, and I mean none. The LOP as I measured it is about 11.5 inches.

One thing to think about is a hand guard. If you are using an extended magazine, there's really no place to hold the gun (I can hold it fine when using the factory rotary magazines, though). This doesn't bother me at all but it's something to consider depending on your own needs. I might try to install an accessory rail on the barrel with a vertical grip sometime in the future.

Either way, you need to buy at least one of these for your 10/22. You won't regret it.

I bought this folding stock because it is light and compact. I can't see any blem in it. It fits my ruger 10/22 snugly. The only thing i would like
is if it is an inch longer in the front.

I though I ordered a take-down model but it looks like they don't have them. Anyhow it worked out OK I took out the Dremel 2 sec of grinding and it was done. A 5/32" gap but it looks GREAT..............

Fit like a glove with no free play and no Modding needed. The 10/22 platform in this stock makes one light, portable, and durable SBR. I'll be buying more and recommending often.

Received the AGP folding stock(a blem) and guess what I could not find a blem anywhere.
Stock was very easy to install and now not only is my rifle easier to carry in a pack BUT also more accurate !
My ruger 10-22 was at best a 3.5 inch shooter at 50 yards but now groups (same ammo and same rest and conditions)into 1.5 inches or less !
I think that the reason is that the barrel is now free floating with no stress pressing aginst the barrel or action.
Needless to say I am extremely happy.
I will be buying more products from this company .

Ordered Friday night. Received in the mail Monday evening. Looks great. Fits great. QD works great for carrying around also. Pretty happy with the product. Can't beat value for the money.

Even though it was a blem it was a good fit, just a little work with a file and it worked fine. Good match for the original.

Blem? Maybe. The only thing I could find that it was a little stiff when folding out and the latch took a bit to clik. I ordered a regular one just to compare and really this is the only diff. I only with there were a way to attach a fore grip or something to this sweet chunk of hardware!

Easy to install...great fit. Better get an optic tho, iron sights are unusable.

I've been looking for a folding stock for my Ruger Takedown for a while this fills the need. The price is good and as stated below, minor trimming with a dremel makes it look like a factory option on the rifle. The match of the AGP stock to the Ruger piece supporting the barrel is dead on. The only "problem", if you want to call it that, is the gap between the barrel and the receiver when assembled. Its a little wider then the factory stock but not a enough to look that out of place. Will buy again if the need arises. P.S. My other 10/22 has a competitors folding stock, when I contacted them about a stock for the 10/22 takedown I was told the earliest IF they offered it would be the end of 2014. Thanks

As other reviewers already stated- nice, solid stock, locks up nicely, fits magazines without sanding and NO blemishes!. Only had to cut a little channel with the Dremel tool to fit the TD. Would buy another one if I needed to. Now, if you guys would offer the dark-earth blemished version- I would buy that too! Oh- and very fast shipping too, I had it in my hands after 2 days of ordering (although shipping is a little pricey ....)

Thanks to your stock, I now have a 10/22 with a 16" barrel that weighs less than 3 pounds. The lightest one I've ever seen.

BTW....what blems were you talking about? I don't see any blems.

I couldn't find a blemish. I also bought this with the idea of altering for my Ruger TD. It took me all of 10 minutes to complete. Color of stock matches the forearm from factory. Added the 1 inch butt pad. Lock up is tight. Quality is great. I will purchase this and additional products from AGP again.

Blems look great to me!

Great Product, fast shipping.

this is my 2nd blem and i cant seem to find a blem on either 1 !!!! it really makes me wonder what a perfect 1 looks like? "blemless" ........

they must have some pretty high standards in QC. best stock for the price by far I've found.

As others have already mentioned, I am unable to find any blemishes on this stock. The stock locks on tight and I look forward to using this stock.

Bought the Blem stock and rubber butt pad. Could not find anything on the stock that would make it a blem. This stock is high quaility, folding arm locks up tight and fit to stock is suberb. Glad I bought the rubber butt pad becuase it is really needed for a little extra lenght. Planning on buying one more in the near future.

I purchased a Blemished stock and can not find the blemish. Stock works great.

What blemish? I would have been happy with this product had I paid full price! If they wouldn't sell this product because of such a small blemish then their non-blemished gear must be top notch! Fit this on my 10/22 TD with just a slight modification to the channel. Love this stock! Keep up the good work AGP!

I got 2 of these stocks and I can't find anything wrong with them at all. They look perfect, fit well and the side fold feture locks in place very tightly. My 10/22's were made in different decades and the stocks still fit perfectly. If I had another 10/22 I would buy another one today.

I am glad I held out and found this stockand at a great price.

I ordered this product expecting to deal with, maybe, a slight imperfection. I can live with that to get a bargain. What I received was a quality product I'm proud to include in my collection. Thanks AGP. Good design; quality product; reasonable price. Not exactly easy to find these days.

Really nice product! I was a little confused about the blem vs the takedown.

The blemish one will not fit a factory takedown without some minor modifications to the front. The LOP with the 1" butt pad is still about an inch shorter than the factory stock, but you can get a better cheek weld.

I can't make the folded unit with a scope fit inside the velcro sack on the case, but it does fit in the center of the case very nicely.

Like others, I can see no blemish on mine :)

Product was as I expected. Modified it to fit a 10/22 takedown model. When folded it fits into the ruger bag with the scope mounted. The folded stock on top of the pocket. I would recommend that AGP would take American Express credit cards, or use Google payment which would making payment easier.

I got the blemished product to save a little on this new 10-22 project. It installed on my action with NO sanding of filing or forcing. The stock folds easily and locks up tight when extended. I tried it on my Ruger TD which has, naturally, a modified action front. The blemished folding stock would fit the Ruger TD action only if you cut a small grove out of the front of the AGP folding stock. But then, AGP has one already confirured for the Ruger TD receiver, don't they? I was just curious and gave it a look-see. I would not hesitate to buy another one and recommend it to anyone considering one.

Great looking product. Needs some work with a de flashing / de burring tool but that's all. Would do the same with any standard stock anyway. Would like to see the back pocket hold a 10 round clip. Overall a great product buy.

I didnt notice any cosmetic or functionality issues with this stock at all... the blem might just be an air bubble somewhere... great deal.

Great stock, fits great w a 1 in buttpad. Cheek rest a bit low with the iron sights but overall a solid stock. Folding is super smooth with a solid lock up. If you scope your 10/22 this is perfect!

I don't think they sell blemished stocks, this is their way of giving a good deal for cheap ass guys willing to take a chance to save a few bucks..and I fit in that category

I got the blemish deal. You'll cry because you missed a killer deal, way worth the money. Lose 2 inches on length of pull to take off 10 inches of length when folded and 1 # in weight. Michigan leagal for stock carbine.

I was surprised to get this stock and see that I could not find a blemish with it. It fit very tight with the receiver and feels very secure. Nice and light, fits in my hiking pack perfect. Thanks for a great product.

Order two of these blem stocks. Maybe a little discoloration on the front of one, but very minimal. Fit was perfect including receiver and magazine fit. Both folders locked up real tight when opened.

Great deal for the money !

So super glad I decided to go with AGP on this 10/22 build. This stock is of utmost quality!! I can't recommend it enough. Super good fit, super tight lock on the hinge, very sturdy, yet very lightweight! I didn't plan on building a take down, but after seeing the quality of their stock, I HAVE to finish this rifle the right way! This company needs more recognition! This stock is TOP TIER, hands down!

Out of the box this stock fits fine, with no mag fit issue in my case.

It is a great lightweight and sturdy stock for cheap. What's not to like?

I couldn't find a thing wrong with it which tells me they have a very strict quality control process at AGP.

Customer Service was awesome! Cortney was very helpful and quick to respond in adjusting my order.

I highly recommend this product and this company.

Didn't really find any blemishes at all to speak of. Wasn't too worried since I knew that I was going to be doing a little dremel work. Only complaint is that the mag well was too tight, my 10 round ruger magazines were not dropping free, had to push them out through the ejection port. Spent some time with a file and it is much better now

Got four of these and I really couldn't be happier. I can't see where these are noticeably blemished, and they are the best-made folding stocks for the 10-22 that I have found to date.

If this is a blem I never found any thing amiss. Bought this for a take down model. Perfect choice a small notch about 1/8" wide 1/4 inch long Dremel tool and 5 minutes and it is like it came that way from Ruger. Also bought 1" butt pad more for a length extension than for recoil but I think it is the way to go. You can't go wrong with this especially on a take down model!

I got the stock in the mail today. The stock seems to be very well made. Lockup is tight and the only blemish I can find are several small circles from the molding process on the right side of the stock. These circles are purely cosmetic and do not prevent the stock from working. Overall, this has been an excellent buy. I have no complaints.

holds the gun well, much better than the butler creek ,it holds the back of the gun the butler creek it just is kind of floaty

had a tiny amount of wiggle in mine (but its a second)

please make a grip cap this stock has more storage than i've ever seen in something so small

i know its intended for use with a sbr but a handguard would be cool (one that didn't interfere with open sights)maybe that mounts with a barrel band and a thin piece of steel between the stock and receiver screw (i've been using a barrel clamp mini rail and a foldy grip)

the stock sits pretty high so using open sights is difficult but is great when using a scope or red dot

for the price i suggest trying it out if you don't like it i'm sure you can sell it and break even

this is my second stock from AGP and I am still very very satisfied with the quality, i can't find any blemish, inside out...good job guys

Good stock, good lock up.

It is a bit short, even with the one inch pad, but it is a tactical stock, so appropriate length for that purpose.

PLEASE make one in Reminton BDL 700!!!! Please, please, please.

Could not find any fault with it anyway. Solid and no wobble....feels really good and compact

I bought the AGP folding stock/blem and am extremely pleased with how well it fits my 10/22 rifle. It is exactly as advertised and I will add more of these to my other regular 10/22 rifles.

I will also buy more of these stocks for my legal 10/22 SBRs matched with the take down barrel configuration as soon as a shorter barrel is offered in a length allowing bulk .22 Long Rifle RF ammo to stay subsonic and still allow the action to function.