lock plus
On Sale

AGP Arms Folding Brace Kit Designed for 22 Charger™ Takedown

$199.00
$149.00

AGP Arms has entered the Pistol Brace world with their side folding kit for the Charger™ 22 Takedown. The kit begins with the familiar AGP Arms pistol grip Gen 2 stock and handguard teamed up with a new billet folding adapter. This 6061 billet adapter incorporates a mount for the Takedown barrel and threaded for the AR style pistol tube 1-3/16-16 threads. The adapter is a push button latch and folds to the right side.

Optional Rear Tube: We designed our adapter to use a standard AR style pistol tube, so feel free to grab any one from your closet and thread on, or order from your favorite online supply house.  If all you need is a tube to support a brace, you'll be just fine with any old tube.  However, we want to note something about the tubes available everywhere and why we recommend purchasing an AGP rear tube.  One shortcoming with the readily available pistol tube is that they are nonconcentric.  Because our tube area is a perfect storage compartment, we wanted to offer a concentric tube, and one that is exact and will fit a 1.00" OD or less suppressor.  You won't be able to slide in your suppressor with your (insert name here) pistol tube.  Buy AGP's tube, it's inexpensive and it's concentric. 1.250" OD x 6.50" Long.

Gear Head Works Tailhook Mod 1.  We have a custom tube (concentric, see above) that has the proper diameter at the end of the tube to fit the Mod 1.  This is a great option and since it's concentric, you can fit your 1.00" suppressor inside. 1.25" OD x 8.25" Long

***Gear Head Works Tailhook Mod 2.  This one is a little more tricky to explain.  Why should you purchase a Tailhook Mod 2 from AGP?  We must modify the Mod 2 to comply with ATF's 13.5" length of pull requirement for brace kits.  The Tailhook Mod 2 is an awesome adjustable length brace, however in factory form it will lock just longer than 13.5", which none of us want.  We re-machine the locking adjustments so that the brace only locks into legal LOP, strip, anodize and reassemble for perfect fit an finish.  Also, in that re-machine stage, we turn the tube section concentric.  (Does anyone else sense a theme)?

The ATF regulates the length of pull (LOP) of a brace to a maximum of 13.5 inches. If the LOP is anything longer than 13.5 inches, it now qualifies as a stock. If you put a stock on a Charger (pistol) the gun is now classified as a short barrel rifle which would require NFA tax stamp.

AGP Arms modifies the Gear Head Works Tailhook Mod 2 to make certain it will not lock at any position longer than 13.5 inches LOP. AGP Arms does this to comply with ATF’s description of a brace, as AGP Arms does not want any customer in the field using a Charger (pistol) with a brace out of compliance.

AGP Arms chose to use the Gear Head Works Tailhook Mod 2 to complete the ultimate bug-out gun. The telescoping feature of the brace was incorporated for the purpose of captivating the takedown barrel in the locked position. By telescoping the brace out, the barrel can then be removed and attached to the gun. Without needing to depress the telescoping button, the brace shortens and locks into place at that locked final shooting position where the LOP is under the 13.5 inch legal description.

Select all the options from us, it will save you a headache shopping around, and frankly this is a really nice piece.  Option it out with some really nice components.  This is truly the most compact .22 LR setup that fits in any small bag or tactical gear.

Handguard Size Option: The options include standard tapered barrel that comes on most 22 Charger Takedowns, or for the new Charger LITE with the .920 OD barrel.

Add Suppressor Plug:  This is the 1/2-28 plug that holds your suppressor and allows it to slide into the rear tube area made from billet 6061 and anodized black.  When using a concentric rear tube, this allows you to fit any 1.00" or less suppressor. Keep all your components all wrapped up nicely in our package.

AGP Arms stock and handguard are injection molded with glass filled nylon for the utmost strength. The kit includes Pistol Grip Stock, Handguard with two Picatinny Rails, and anodized black billet folding adapter.

Read more
Add to wishlist

Description

AGP Arms has entered the Pistol Brace world with their side folding kit for the Charger™ 22 Takedown. The kit begins with the familiar AGP Arms pistol grip Gen 2 stock and handguard teamed up with a new billet folding adapter. This 6061 billet adapter incorporates a mount for the Takedown barrel and threaded for the AR style pistol tube 1-3/16-16 threads. The adapter is a push button latch and folds to the right side.

Optional Rear Tube: We designed our adapter to use a standard AR style pistol tube, so feel free to grab any one from your closet and thread on, or order from your favorite online supply house.  If all you need is a tube to support a brace, you'll be just fine with any old tube.  However, we want to note something about the tubes available everywhere and why we recommend purchasing an AGP rear tube.  One shortcoming with the readily available pistol tube is that they are nonconcentric.  Because our tube area is a perfect storage compartment, we wanted to offer a concentric tube, and one that is exact and will fit a 1.00" OD or less suppressor.  You won't be able to slide in your suppressor with your (insert name here) pistol tube.  Buy AGP's tube, it's inexpensive and it's concentric. 1.250" OD x 6.50" Long.

Gear Head Works Tailhook Mod 1.  We have a custom tube (concentric, see above) that has the proper diameter at the end of the tube to fit the Mod 1.  This is a great option and since it's concentric, you can fit your 1.00" suppressor inside. 1.25" OD x 8.25" Long

***Gear Head Works Tailhook Mod 2.  This one is a little more tricky to explain.  Why should you purchase a Tailhook Mod 2 from AGP?  We must modify the Mod 2 to comply with ATF's 13.5" length of pull requirement for brace kits.  The Tailhook Mod 2 is an awesome adjustable length brace, however in factory form it will lock just longer than 13.5", which none of us want.  We re-machine the locking adjustments so that the brace only locks into legal LOP, strip, anodize and reassemble for perfect fit an finish.  Also, in that re-machine stage, we turn the tube section concentric.  (Does anyone else sense a theme)?

The ATF regulates the length of pull (LOP) of a brace to a maximum of 13.5 inches. If the LOP is anything longer than 13.5 inches, it now qualifies as a stock. If you put a stock on a Charger (pistol) the gun is now classified as a short barrel rifle which would require NFA tax stamp.

AGP Arms modifies the Gear Head Works Tailhook Mod 2 to make certain it will not lock at any position longer than 13.5 inches LOP. AGP Arms does this to comply with ATF’s description of a brace, as AGP Arms does not want any customer in the field using a Charger (pistol) with a brace out of compliance.

AGP Arms chose to use the Gear Head Works Tailhook Mod 2 to complete the ultimate bug-out gun. The telescoping feature of the brace was incorporated for the purpose of captivating the takedown barrel in the locked position. By telescoping the brace out, the barrel can then be removed and attached to the gun. Without needing to depress the telescoping button, the brace shortens and locks into place at that locked final shooting position where the LOP is under the 13.5 inch legal description.

Select all the options from us, it will save you a headache shopping around, and frankly this is a really nice piece.  Option it out with some really nice components.  This is truly the most compact .22 LR setup that fits in any small bag or tactical gear.

Handguard Size Option: The options include standard tapered barrel that comes on most 22 Charger Takedowns, or for the new Charger LITE with the .920 OD barrel.

Add Suppressor Plug:  This is the 1/2-28 plug that holds your suppressor and allows it to slide into the rear tube area made from billet 6061 and anodized black.  When using a concentric rear tube, this allows you to fit any 1.00" or less suppressor. Keep all your components all wrapped up nicely in our package.

AGP Arms stock and handguard are injection molded with glass filled nylon for the utmost strength. The kit includes Pistol Grip Stock, Handguard with two Picatinny Rails, and anodized black billet folding adapter.

Reviews (5)

Write a review

Good With Fitting Issues

Overall, I like the setup, but fitting was required. It was not drop-in. I had to file and sand a good bit before the receiver would go into the stock. It was difficult to tell where the receiver was hitting, but mine was mostly hitting in the front. Recommend advising people that some fitting might be required so they aren't surprised if they need to.
Posted by Paul on 5th Feb 2020

My New Stock

Ok, got the New Stock in Friday and assembled, it went together in a snap. Got other accessories and installed them too. Went to the range Sunday with my friends, lucky to get our lanes together. Plopped my back pack down in my lane and started to pull out the mags one drum and three sticks. Pulled out my Charger with the New Stock somebody said, Hey look at this! To make a long story short, the next time I touched my Charger with the New Stock. The scope was sighted in and the all the mags were empty, yes I call them friends. When it was my turn, after I loaded the mags again. This is the best after market stock I have ever bought, I couldn’t be happier. The young lady I emailed at the company made everything happen, couldn’t have asked for better service. Need more accessories, need to trick this thing out. Highly recommend this company, service and product were good to see and made me feel important.
Posted by Scott Davis on 5th Feb 2020

Takedown Ruger charger armbrace

Absolutely love this product great job guys! Everything drops in like it should nice snug and tight easy installation. Best product for price!
Posted by Steve Hickman on 5th Feb 2020

Videos

Additional info

SKU: AGP-CHR-BRACEKIT
Width: 8.00
Height: 6.00
Depth: 4.00
Shipping: Calculated at Checkout