lock plus

AGP Arms 10/22 Takedown Conversion

$225.00

This is a conversion kit to make a Takedown 10/22® or 22 Charger Takedown out of your fixed barrel Ruger® 10/22® or fixed barrel Charger. This kit will NOT work on a Factory Ruger 10/22 Takedown® model rifle or Charger.

The heart of this system is our custom stainless 16" 1:12 twist barrel that is ¾ lb lighter than factory and threaded 1/2-28 to add your favorite muzzle device. The barrel works hand-in-hand with our quick release, return to zero adaptor. This system is engineered so no tools are needed to remove or re-install the barrel in just seconds, and with a front iron sight installed it will remain sighted in to a receiver mounted optic.

We have many options you can add:

The stock is a push button latch, right side folding assembly. Constructed from injection molded glass filled Nylon, it's very strong while being super lightweight. With the barrel removed, the folded stock/receiver assembly is very compact at under 11" long. Everything can easily fit into any backpack, duffel bag, small RV cabinet, boat, bush plane, daypack, kayak, under a seat, in a spare tire well, etc. The possibilities are endless.

The length when folded with the 16" barrel is 24.75

Standard parts before options include:

16" Stainless Threaded Barrel
7.25" Stainless Threaded Barrel (This is to be used on a Charger 22 with a brace or an SBR)
Quick release barrel takedown adapter
Knurled nut instead of handguard

 

PLEASE CHECK YOUR LOCAL LAWS BEFORE ORDERING A 7.25" BARREL!!!  Any barrel shorter than 16 inches cannot be affixed to a rifle unless you have registered it as an SBR (Short Barrel Rifle).  A 7.25" Barrel can be affixed to a Charger 22 as long as you don't affix a stock to the Charger.  If you install a stock on a Charger that also falls under an SBR.  You can install a Brace to your Charger 22, with the 7.25" Barrel.

 

4/1/21: We are working on producing these and filling backorders, so we are not taking new orders for this item at this time.  Thank you for your continued patience and support.  

 

Read more

Description

This is a conversion kit to make a Takedown 10/22® or 22 Charger Takedown out of your fixed barrel Ruger® 10/22® or fixed barrel Charger. This kit will NOT work on a Factory Ruger 10/22 Takedown® model rifle or Charger.

The heart of this system is our custom stainless 16" 1:12 twist barrel that is ¾ lb lighter than factory and threaded 1/2-28 to add your favorite muzzle device. The barrel works hand-in-hand with our quick release, return to zero adaptor. This system is engineered so no tools are needed to remove or re-install the barrel in just seconds, and with a front iron sight installed it will remain sighted in to a receiver mounted optic.

We have many options you can add:

The stock is a push button latch, right side folding assembly. Constructed from injection molded glass filled Nylon, it's very strong while being super lightweight. With the barrel removed, the folded stock/receiver assembly is very compact at under 11" long. Everything can easily fit into any backpack, duffel bag, small RV cabinet, boat, bush plane, daypack, kayak, under a seat, in a spare tire well, etc. The possibilities are endless.

The length when folded with the 16" barrel is 24.75

Standard parts before options include:

16" Stainless Threaded Barrel
7.25" Stainless Threaded Barrel (This is to be used on a Charger 22 with a brace or an SBR)
Quick release barrel takedown adapter
Knurled nut instead of handguard

 

PLEASE CHECK YOUR LOCAL LAWS BEFORE ORDERING A 7.25" BARREL!!!  Any barrel shorter than 16 inches cannot be affixed to a rifle unless you have registered it as an SBR (Short Barrel Rifle).  A 7.25" Barrel can be affixed to a Charger 22 as long as you don't affix a stock to the Charger.  If you install a stock on a Charger that also falls under an SBR.  You can install a Brace to your Charger 22, with the 7.25" Barrel.

 

4/1/21: We are working on producing these and filling backorders, so we are not taking new orders for this item at this time.  Thank you for your continued patience and support.  

 

Reviews (28)

Write a review

10/22 Takedown Conversion

This kit was just what I expected and more. The part swap from the original stock was simple as was the barrel receiver install. This kit give you a serious light weight and compact 10/22.
Posted by Steve Dahl on 25th Feb 2021

10/22 Conversion

Outstanding product and beyond easy to install. Well worth the cost. Highly recommended for a survival weapon ..........
Posted by Rick on 12th Jan 2021

10/22 Folding Stock Gen2 & Takedown Conversion

Fantastic quality on both items. Lightweight folding stock and 16" barrel that are very functional for a fair price point. Recommended for anyone needing a compact rifle for transportation or otherwise. Have used the takedown barrel and handguard a dozen times and still holds zero very well. Thanks AGP!
Posted by SwiftSilentDimwit on 15th Jul 2019

Videos

Additional info

SKU: AGP-1022-TDCONVERSION
Width: 20.00
Height: 6.00
Depth: 4.00